2024-03-18, 10:49 PM
(This post was last modified: 2024-03-18, 11:05 PM by B B. Edited 1 time in total.)
Hello,
Please let me know if this is posted in the wrong place, as I am new.
I wanted to transfer my Jellyfin installation from an old laptop that is running a bare-metal Ubuntu server to my new home lab server running ProxMox. I read on the subject as much as I could before starting and finally decided to follow the tips from this thread: https://forum.jellyfin.org/t-transferrin...x-to-linux. I copied the /etc/jellyfin and /var/lib/jellyfin directories from my old computer and put them on a USB flash drive. I then installed Jellyfin for Debian on a LXC container on my ProxMox server and stopped the process using "systemctl stop jellyfin" as instructed. I then copied the two directories onto the new Jellyfin installation, but I cannot connect to Jellyfin's Web UI. Some interesting things that might help narrow down the issue are: re: After Jellyfin is installed, I get the setup page without any issues, but it seems to break after I stop it and overwrite the /etc and /var/lib folders (and then run the service again). I might be mistaken here, but I also believe that installing jellyfin on the LXC container does not create the /etc and /var/lib directories at all, which makes me wonder if those files are stored somewhere else for some reason nowadays and I am breaking the system by putting them there. I can double check whether the directories are created in a new LXC container if you need me to.
Thank you in advance!
EDIT: Forgot to mention that I also changed the owner of both directories after copying them to the new computer.
Please let me know if this is posted in the wrong place, as I am new.
I wanted to transfer my Jellyfin installation from an old laptop that is running a bare-metal Ubuntu server to my new home lab server running ProxMox. I read on the subject as much as I could before starting and finally decided to follow the tips from this thread: https://forum.jellyfin.org/t-transferrin...x-to-linux. I copied the /etc/jellyfin and /var/lib/jellyfin directories from my old computer and put them on a USB flash drive. I then installed Jellyfin for Debian on a LXC container on my ProxMox server and stopped the process using "systemctl stop jellyfin" as instructed. I then copied the two directories onto the new Jellyfin installation, but I cannot connect to Jellyfin's Web UI. Some interesting things that might help narrow down the issue are: re: After Jellyfin is installed, I get the setup page without any issues, but it seems to break after I stop it and overwrite the /etc and /var/lib folders (and then run the service again). I might be mistaken here, but I also believe that installing jellyfin on the LXC container does not create the /etc and /var/lib directories at all, which makes me wonder if those files are stored somewhere else for some reason nowadays and I am breaking the system by putting them there. I can double check whether the directories are created in a new LXC container if you need me to.
Thank you in advance!
EDIT: Forgot to mention that I also changed the owner of both directories after copying them to the new computer.