2023-08-03, 03:42 AM
I would not turn off transcoding. Unless you have a known set of devices, with known capabilities, and your library strictly adheres to those known limitations.
Jellyfin will always direct play when possible.
Your transcoding directory is in Settings > Dashboard > Playback (About halfway down)
Since the ffmpeg log you attached was copying the video and audio into a new container (no reencoding) if the transcode directory is on a small volume it would fill up pretty quickly. I'm saying that is what is happening. Just grasping at straws.
What does your storage look like? RAID? ZFS? Hardware specs, just for giggles? Does it have a GPU?
Jellyfin will always direct play when possible.
Your transcoding directory is in Settings > Dashboard > Playback (About halfway down)
Since the ffmpeg log you attached was copying the video and audio into a new container (no reencoding) if the transcode directory is on a small volume it would fill up pretty quickly. I'm saying that is what is happening. Just grasping at straws.
What does your storage look like? RAID? ZFS? Hardware specs, just for giggles? Does it have a GPU?
Jellyfin 10.10.7 (Docker)
Ubuntu 24.04.2 LTS w/HWE
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
4x WD Red Pro 6TB CMR in RAIDZ1
![[Image: GitHub%20Sponsors-grey?logo=github]](https://img.shields.io/badge/GitHub%20Sponsors-grey?logo=github)
Ubuntu 24.04.2 LTS w/HWE
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
4x WD Red Pro 6TB CMR in RAIDZ1