2024-06-18, 05:23 AM
(This post was last modified: 2024-06-18, 07:04 AM by fedonr. Edited 1 time in total.)
Okay, so here is how I fixed it. Jellyfin Devs can look further into it.
So if I start Fresh and clear config each time for Fresh Jellyfin Instance, the issues stays persistent no matter the version I use, either 10.7.7, 10.8.0, 10.8.9 or 10.9.6. Library scan shows stuck at x% and suddenly stops, while only updating 1 movie without any Metadata.
But now if I go back to 10.7.7 Fresh Install the issue was still there, but this time while upgrading 10.8.9 instead of fresh I did a dirty upgrade, keeping the config from 10.7.7, and doing that dirty upgrade somehow fixed it and I am able to scan all my libraries now, all movies are updated with all Metadata. But something here is a hit or miss. As when I upgrade to 10.9.6 (dirty upgrade) I face the same issue again, reverting back to 10.8.9 works again. I would so some more testing to see how the pattern goes and would update if there is any change.
In short, 1 Movie updated=doesnt work, all movies updated=works
Fresh 10.7.7 (Doesnt work), Fresh 10.8.9 (doesnt work), Fresh 10.9.6 (doesnt work)
In Fresh 10.7.7 after first scan in 10.7.7, which would not work, do the Dirty upgrade to 10.8.9, and remove/Add the same library (works)
In Fresh 10.7.7 after first scan in 10.7.7, which would not work, do the Dirty upgrade to 10.9.6, and remove/Add the same library (doesnt work)
So if I start Fresh and clear config each time for Fresh Jellyfin Instance, the issues stays persistent no matter the version I use, either 10.7.7, 10.8.0, 10.8.9 or 10.9.6. Library scan shows stuck at x% and suddenly stops, while only updating 1 movie without any Metadata.
But now if I go back to 10.7.7 Fresh Install the issue was still there, but this time while upgrading 10.8.9 instead of fresh I did a dirty upgrade, keeping the config from 10.7.7, and doing that dirty upgrade somehow fixed it and I am able to scan all my libraries now, all movies are updated with all Metadata. But something here is a hit or miss. As when I upgrade to 10.9.6 (dirty upgrade) I face the same issue again, reverting back to 10.8.9 works again. I would so some more testing to see how the pattern goes and would update if there is any change.
In short, 1 Movie updated=doesnt work, all movies updated=works
Fresh 10.7.7 (Doesnt work), Fresh 10.8.9 (doesnt work), Fresh 10.9.6 (doesnt work)
In Fresh 10.7.7 after first scan in 10.7.7, which would not work, do the Dirty upgrade to 10.8.9, and remove/Add the same library (works)
In Fresh 10.7.7 after first scan in 10.7.7, which would not work, do the Dirty upgrade to 10.9.6, and remove/Add the same library (doesnt work)