2023-08-24, 07:31 PM
(This post was last modified: 2023-08-24, 07:32 PM by TheDreadPirate. Edited 1 time in total.)
I can't speak for Kodi or DLNA. But we would need to know more about the video itself. Like what codec the video and audio is using.
One of the most difficult aspects of Jellyfin clients are device profiles. What the device can and can't play. Or how the client interprets the device profile and gets it wrong. Resulting in this kind of situation where it transcodes unnecessarily.
Having said that. Is there a reason you're avoiding transcoding? Does your hardware not perform well enough to transcode? No GPU? Do you have an AMD GPU and the transcode quality is garbage?
One of the most difficult aspects of Jellyfin clients are device profiles. What the device can and can't play. Or how the client interprets the device profile and gets it wrong. Resulting in this kind of situation where it transcodes unnecessarily.
Having said that. Is there a reason you're avoiding transcoding? Does your hardware not perform well enough to transcode? No GPU? Do you have an AMD GPU and the transcode quality is garbage?
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430