2024-07-28, 03:13 PM
(This post was last modified: 2024-07-29, 06:09 AM by Nero_XIII. Edited 1 time in total.)
Ok finally i got some time to see the logs.
I Put them into Pastebin, i set a password: 5hctzL5uyA
Thats the log if i disable the transcoding where the CPU goes very high on transcoding it (onece more: this is just one example video, many others do have the same problem, 720p videos are not affected as far as i can see right now.
https://pastebin.com/AweKy9jm
Also i get this information in Jellyfin while it is running:
"The media is converted into a format that is compatible with the playback device.
Frame rate: 405fps
4.1Mbps TS H264 AAC
Reason for transcoding
Video resolution is not supported"
Further i enabled the Hardware Transcoding again once in AMD AMF (i got the Ryzen Pro 5650G with APU) this is the lof for this:
https://pastebin.com/0WeNwqS1
The Chromecast Stick does not play the media, it loads it and then it stops and drops me back in idle wallpaper screen.
After that i changed to VAAPI, nothing changes, same issue like above.
https://pastebin.com/AVDNzeWK
Also i am not sure what i need to enable under Transcoding so i just choose this setup (i already played around with it but i no setup works)
Hardwareaccleration:
VAAPI
VA-API-Device
/dev/dri/renderD128
Decoding:
H265
HEVC
Option for Hardwarecoding:
Hardwarecoding enabled
I hope this helps.
*Addition*
I am not 100% sure but i think that the direct play worked already for those files some time ago under an older version of Jellyfin. At the moment this is just a thought which i cannot prove.
I also just did an update to 10.9.8 and will have a test today afternoon if the issue maybe was related to the version
I Put them into Pastebin, i set a password: 5hctzL5uyA
Thats the log if i disable the transcoding where the CPU goes very high on transcoding it (onece more: this is just one example video, many others do have the same problem, 720p videos are not affected as far as i can see right now.
https://pastebin.com/AweKy9jm
Also i get this information in Jellyfin while it is running:
"The media is converted into a format that is compatible with the playback device.
Frame rate: 405fps
4.1Mbps TS H264 AAC
Reason for transcoding
Video resolution is not supported"
Further i enabled the Hardware Transcoding again once in AMD AMF (i got the Ryzen Pro 5650G with APU) this is the lof for this:
https://pastebin.com/0WeNwqS1
The Chromecast Stick does not play the media, it loads it and then it stops and drops me back in idle wallpaper screen.
After that i changed to VAAPI, nothing changes, same issue like above.
https://pastebin.com/AVDNzeWK
Also i am not sure what i need to enable under Transcoding so i just choose this setup (i already played around with it but i no setup works)
Hardwareaccleration:
VAAPI
VA-API-Device
/dev/dri/renderD128
Decoding:
H265
HEVC
Option for Hardwarecoding:
Hardwarecoding enabled
I hope this helps.
*Addition*
I am not 100% sure but i think that the direct play worked already for those files some time ago under an older version of Jellyfin. At the moment this is just a thought which i cannot prove.
I also just did an update to 10.9.8 and will have a test today afternoon if the issue maybe was related to the version