2023-08-25, 03:18 PM
Can you share your jellyfin and ffmpeg logs? We need to verify that ffmpeg successfully used the hardware. I'm leaning towards "probably". Since you enabled QSV and it didn't fail to play, it is probably transcoding with QSV. High CPU usage isn't unusual. Keep in mind that even with hardware accelerated transcoding, your CPU still has to feed and orchestrate the GPU's activities.
Again, the jellyfin and ffmpeg logs will guide us.
Again, the jellyfin and ffmpeg logs will guide us.
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430