2024-08-20, 06:13 PM
FYI, you may have noticed that I moved your post from the wrong thread here.
I haven't noticed any issues using multiple drives at the same time. But one of my drives on the SATA expansion card isn't used a lot.
To test this, I copied a big movie from my ZFS array to my NVMe drive to remove that as a limiting factor and then simultaneously copied the file to both of the drives connected to the expansion card. The throughput is where I'd expect each to be.
I haven't noticed any issues using multiple drives at the same time. But one of my drives on the SATA expansion card isn't used a lot.
To test this, I copied a big movie from my ZFS array to my NVMe drive to remove that as a limiting factor and then simultaneously copied the file to both of the drives connected to the expansion card. The throughput is where I'd expect each to be.
Jellyfin 10.10.7 (Docker)
Ubuntu 24.04.2 LTS w/HWE
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
4x WD Red Pro 6TB CMR in RAIDZ1
![[Image: GitHub%20Sponsors-grey?logo=github]](https://img.shields.io/badge/GitHub%20Sponsors-grey?logo=github)
Ubuntu 24.04.2 LTS w/HWE
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
4x WD Red Pro 6TB CMR in RAIDZ1