2024-08-22, 01:33 AM
I also run Ubuntu 24.04 Server. No GUI installed.
The next step is to figure out why the GPU is not fully initializing with the command and directions I provided in my last post.
The next step is to figure out why the GPU is not fully initializing with the command and directions I provided in my last post.
(2024-08-19, 01:35 PM)TheDreadPirate Wrote: While I'm researching, can you reboot the server and immediately after rebooting run this command?
Code:sudo dmesg | grep i915
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430