2024-10-12, 07:38 AM
(This post was last modified: 2024-10-12, 07:43 AM by tipitao. Edited 1 time in total.)
Good morning, I wanted to know if the infrastructure I have and having only 1 user in my internal network, if the appropriate thing is to do transcoding with my NAS N100 or that the Samsung TV does that function. Depending on the answer, I would activate or deactivate the transcoding. If the option was to activate the transcoding, I have seen an answer that leaves the VP8 codec deactivated in addition to this. Are there any other options in the Jellyfin server configuration to take into account?. Sometimes the Samsung TV displays the message "network cable disconnected" and then immediately "network cable connected" for example when watching a 1080p 11 Gb movie. It could not be that the 100 mb/s of your ethernet are saturated.
-Nas
Cpu: Intel N100
Ram: 16 GB Ddr5
Disc: 1 Nvme (docker data) and 3 x Ironwolft 3.5' (user data)
Network: : 4 ethernet x 2.5 Gb
-Smart Tv
Brand: Samsung 55NU8000
Resolution: 4K Hdr
Network: Ethernet 100 Mb
-Router
Brand ZTE
Network: 1 Gb
The internal wiring is 1 Gb and the speed is also good.
Regards
-Nas
Cpu: Intel N100
Ram: 16 GB Ddr5
Disc: 1 Nvme (docker data) and 3 x Ironwolft 3.5' (user data)
Network: : 4 ethernet x 2.5 Gb
-Smart Tv
Brand: Samsung 55NU8000
Resolution: 4K Hdr
Network: Ethernet 100 Mb
-Router
Brand ZTE
Network: 1 Gb
The internal wiring is 1 Gb and the speed is also good.
Regards