Transcoding not working

[Barnax]

Hi,

Im having issues with transcoding my media, this started after updating Jellyfin to 10.10.0. Im running everything on TrueNAS Scale.

It doesn't seem to be a hardware issue, im running Nvidia NVENC, the problem persists even after turning off hardware acceleration.

Ill share my logs down below but from what i can gather from the transcode log its a permission issue?

Code:

[hls @ 0x559cc5f89c00] Opening '/cache/transcodes/097e7cb5b9e544bf802d84a504bbefce-1.mp4' for writing
[hls @ 0x559cc5f89c00] Failed to open segment '097e7cb5b9e544bf802d84a504bbefce-1.mp4'
[out#0/hls @ 0x559cc5f618c0] Could not write header (incorrect codec parameters ?): Permission denied
[vf#0:0 @ 0x559cc5ff16c0] Error sending frames to consumers: Permission denied
[vf#0:0 @ 0x559cc5ff16c0] Task finished with error code: -13 (Permission denied)
[vf#0:0 @ 0x559cc5ff16c0] Terminating thread with return code -13 (Permission denied)
[out#0/hls @ 0x559cc5f618c0] Nothing was written into output file, because at least one of its streams received no packets.
frame=    0 fps=0.0 q=0.0 Lsize=      0KiB time=N/A bitrate=N/A speed=N/A   
Conversion failed!

I don't understand why that would stop working after the update, JellyFin has no problems with other permissions, it can play other media normally it just cant transcode.

log_20241104.log
FFmpeg.Transcode-2024-11-04_17-50-36_c2b7538931964f123971a49902b89908_d04326ff.log

Would appreciate any help on the matter, thanks in advance!