2023-11-17, 05:04 PM
(This post was last modified: 2023-11-17, 05:06 PM by tmsrxzar. Edited 1 time in total.)
i am guessing you are new to linux
the 'path to your new drive' would be the 'mount path', the device tree path /dev/sdd* is not a mount path (it's a device tree)
if not already done make sure there is an fstab entry for the new drive, best practice is to mount by uuid so that device tree identifiers changing do not alter mounts - https://www.cyberciti.biz/faq/linux-find...date-fstab
once you have it auto mounting to a location (mount -a or restart), typically to a path under /mnt/, then you can add that path to Jellyfin
from what i am gathering you are just opening the file explorer and now see your drive, this is not the proper way to set up a mount
the 'path to your new drive' would be the 'mount path', the device tree path /dev/sdd* is not a mount path (it's a device tree)
if not already done make sure there is an fstab entry for the new drive, best practice is to mount by uuid so that device tree identifiers changing do not alter mounts - https://www.cyberciti.biz/faq/linux-find...date-fstab
once you have it auto mounting to a location (mount -a or restart), typically to a path under /mnt/, then you can add that path to Jellyfin
from what i am gathering you are just opening the file explorer and now see your drive, this is not the proper way to set up a mount