2024-04-07, 07:49 AM
(This post was last modified: 2024-04-07, 04:28 PM by TheDreadPirate. Edited 1 time in total.)
Hi there,
I've setup an LXC container for Jellyfin on Proxmox and also have a VM running OpenMediaVault on Proxmox.
I am stuck at the point of sharing drives (currently accessible via OMV) into Jellyfin.
From what I've read I need to share the drive via a NFS service in OpenMediaVault and make it accessible to the Proxmox client (which I've done).
Apparently next step is to add the virtual drive on mnt/pve/Elements in Proxmox and add the mnt with pct set to pct set xxx -mp0 /mnt/pve/Elements,mp=/elements,shared=1 (with xxx being the several numbers for the container).
And then what is the link that gets shared for the drive into the Jellyfin setup?
Is that right and can anyone advise on how to achieve this in Proxmox?
Thanks!
I've setup an LXC container for Jellyfin on Proxmox and also have a VM running OpenMediaVault on Proxmox.
I am stuck at the point of sharing drives (currently accessible via OMV) into Jellyfin.
From what I've read I need to share the drive via a NFS service in OpenMediaVault and make it accessible to the Proxmox client (which I've done).
Apparently next step is to add the virtual drive on mnt/pve/Elements in Proxmox and add the mnt with pct set to pct set xxx -mp0 /mnt/pve/Elements,mp=/elements,shared=1 (with xxx being the several numbers for the container).
And then what is the link that gets shared for the drive into the Jellyfin setup?
Is that right and can anyone advise on how to achieve this in Proxmox?
Thanks!