SOLVED: Failed loading Jellyfin install on Unraid Docker

[Corax]

Hi all,
I'm new to Jellyfin, havent used Plex for a very long time. I'm wanting to make the switch, however I'm having problems.
I've done a bit of google seraching, however it looks like the information for this 

I use Unraid for my server and all my media. I've successfully installed the Jellyfin App (using Linuxservers repository) and selected the tv show & movie folder locations. 
It displays all ok from what I can see in the Unraid Docker, but when I attempt to open the WebUI, it wont take me to the main screen, I simply receive the 'This site can't be reached' page.

I havent changed any other settings, and its going to my unraid server http://192.168.xxx.xxx:8096

Any help to fix this would be great.

[TheDreadPirate]

I'm not familiar with Unraid and their, I'm assuming, container implementation. But in a Docker setup you need to open port 8096. Also, if you are NOT using host networking for the container, Jellyfin will have gotten its own IP.

[bitmap]

Even with the bridge network (which I'd probably recommend), you'll be able to access from the host IP. Did you use standard port mapping or change anything?

Providing your config via screenshot would help, as well as if you can get your logs it would be useful to try and troubleshoot.

[Corax]

Below is a screenshot of the setup. 
Port 8096 is shown as a default port and I haven't changed that. 

Jellyfin defaults its url as 192.168.0.5 which Ive tried and also tried replacing it with my server ip, but neither seems to work.

When I access the Logs I get the same Warning which says 'Failed to create CoreCLR, HRESULT: 0x80070008'

[bitmap]

The published IP should be the IP of your Unraid box. You don't have to change the ports, but that can change how you access. I would change the IP to your Unraid IP and restart the container.

For the error you're seeing, guessing it's this: https://docs.linuxserver.io/faq#jammy

So you would probably need to add the additional line suggested in option 2, which you can do with one of the bottom two options (I think in show more settings).

[Corax]

Thankyou!
All is working now from what I can see.
Much appreciated