2024-02-10, 11:03 PM
(This post was last modified: 2024-02-10, 11:31 PM by tmsrxzar. Edited 3 times in total.)
close enough, it's not the same as mine because i'm on linux using command line and you're using the gui
same information in both though
accord to spec the 2018 stick supports "H.265 (HEVC). Hardware accelerated up to 3840x2160p (4K) @ 60fps, 35 Mbps, Main 10 Profile Level 5.1"
but your non-working ones are
Main 10 Profile Level 4
i'm not sure from their spec sheet if it's meant to be "up to" 5.1 or if it means "only" 5.1
your bitrate 4Mbps is well under the max 35Mbps
your 23.976fps is well under the 60fps
even the Matrix coefficients match
there actually seems to be no reason to it, ones that don't work look just like ones that do
since these are all downloaded i can't even ask what settings you've used to encode them because you didn't
same information in both though
accord to spec the 2018 stick supports "H.265 (HEVC). Hardware accelerated up to 3840x2160p (4K) @ 60fps, 35 Mbps, Main 10 Profile Level 5.1"
but your non-working ones are
Main 10 Profile Level 4
i'm not sure from their spec sheet if it's meant to be "up to" 5.1 or if it means "only" 5.1
your bitrate 4Mbps is well under the max 35Mbps
your 23.976fps is well under the 60fps
even the Matrix coefficients match
Quote:8-bit Rec. 709 (HEVC Main profile L5) / 8-bit Rec. 709
10-bit Rec. 709 (HEVC Main10 profile L5) / 10-bit Rec. 709
10-bit Rec. 2020 (HEVC Main10 profile L5) / 10-bit Rec. 2020
there actually seems to be no reason to it, ones that don't work look just like ones that do
since these are all downloaded i can't even ask what settings you've used to encode them because you didn't