2024-08-19, 08:28 PM
As long as the DAS enclosure "passes through" the hard drive, it should behave the same as your drives do now. Depending on how you setup fstab you may need to update it. As long as you used the unique WWN identifier you shouldn't need to change anything. If you used the sda, sdb, sdc, etc., device path than those will probably shift around. And you will be able to share than over the network. SMB/NFS doesn't care what kind of drive it is or how it is attached.
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430